EX-CAM-A ATEX approved CCTV camera

ATEX certified camera

Introduction

The EX-CAM-A camera is an ATEX zone 1 certified CCTV camera which produces high quality video. The camera incorporates a 1/4 type Sony "next generation" Super HADT CCD with a newly developed Digital Signal Processor (DSP) and firmware that greatly enhances its operatibility and picture quality. With a minimum sensitivity of 1.5 lux and ultra-compact size (measuring Ø60 mm x 90 mm and weighing less than 600 grams), the EX-CAM-A ATEX CCTV camera is ideal for installing CCTV and surveillance systems in hazardous areas. The camera is extremely rugged, with certifications exceeding IP68 as well as impact and drop classifications.

 

Certification:

ATEX zone 1 and Zone 2

EX II 2G
Ex d IIc T6

 

 

Specifications

Image Sensor 1/4 type

::

IT CCD (Super HAD CCD)

Number of Effective Pixels

::

Approx. 440,000 pixels

Lens

::

-10x Zoom f=4.2 to 42mm (F1.8 to F2.9)

Digital Zoom

::

4x (40x with the addition of optical zoom)

Angle of View (H)

::

46 degrees (wide) and 5.0 degrees (tele)

Min. Object Distance

::

10mm (wide), 1000mm (tele)

Min. Illumination

::

1.5 lx / 50IRE

Signal vs. Noise ratio

::

Better than 50dB

Electronic Shutter

::

1/1 to 1/10,000 sec. in 22 steps

White Balance

::

Auto, Outdoor, One Push, Manual, ATW, Indoor.

Gain

::

Auto and Manual (-3 to 28dB, 2dB steps)

AE Control

::

Auto and Manual, Priority mode, Bright

EV Compensation

::

-10.5 to +10.5dB (1.5dB steps)

Back Light

::

On/Off

Flicker Cancel

::

Auto

Focusing System

::

Auto(Sensitivity :Nor, L), One-Push Auto Focus, Manual

Video Output

::

VBS:1.0Vp-p (Sync Negative)Y/C Output

Camera Control Interface

::

VISCA (TTL/RS-232C signal level) . RS 422/485 available

Storage Temp

::

-20° to 60°C (-4°F to 140°F)

Operating Temp

::

0° to 50°C (32°F to 122°F)

Power Consumption

::

6 to 12 Volts DC / 1.6W with inactive motors and 2.1W typical

Weight

::

240 grams (8 oz)

Dimensions (DxL)

::

Ø 55 mm x 80mm