Xpoint I : : Access point with Intrinsically safe antenna connections

 

Intrinsically safe access point

 

 

  • Introduction
  • Specifications
  • Certifications

 

An intrinsically safe access point that provides an excellent alternative to placing the AP in hazardous area. The AP features 802.11n support and allows for the use of a wide range of antennas. The Xpoint I is an economic option for creating wireless networks in explosive atmospheres.

 

Just Connect POE and antenna cable to install a fully featured wireless network in hazardous area. Any Xbeam-EX antenna can be utilized, enabling supreme flexibility having the choice from a range of omni directional, patch, sector and directional antennas. Using our ultra low loss coax cables you can create comprehensive wireless coverage on a tiny budget.

 

To explore the full potential of the Xpoint I, we recommend to use Xcable F and Xcable G. These cables have only 7 dB loss pr 100 meters.

 

NOTE: The Access Point must be located in safe area. It produces an intrinsically safe output for connecting low loss coax cables running to the antenna which is located in hazardous area. Coax cable length can be above 100 meters.

 

Wireless standards

 :: 802.11abg , 802.11n ready. (300 mbps)

Enclosure

 :: GRP

Antenna outputs

 :: N-type: 3x Ex-i connections for 802.11n and 2x Ex-i connectors for 802.11g

Security

 :: Advanced WPA2/802.11i security

Frequencies

 :: 2.4 ghz + 5ghz dual mode

Quality of service

 :: 802.11e wireless multimedia

Mesh features

 :: Mesh network support

Protection

 :: Lightning/surge protection

Installation

 :: Easy to install (no fixed cables)

 

 

 

Antenna config

 

 

 

::

::

::

::

2W amplifier option for 2 km + range

VisiWear EX-ANT-B antennas included

Diversity or single antenna options

Aluminium and stainless steel versions

 

 

 

Connections

::

::

::

Fiber optic interface option (100base-fx)

POE (power over ethernet) support and

220 V version on available

 

 

 

Radio data

::

::

::

::

802.11g output power: 100 mW
802.11a output power: 50 mW
Amplifier option available up to 2W
Maximum sensitivity: 96 dBm (1 mbps)

 

 

 

Security Standards

::

::

::

::

::

WPA
WPA2 (802.11i)
Cisco TKIP
Cisco message integrity check (MIC)
IEEE 802.11 WEP keys of 40 bits and 128 bits

 

 

 

802.1X EAP types

::

::

::

::

::

::

::

EAP-Flexible Authentication via Secure Tunneling
Protected EAP-Generic Token Card (PEAP-GTC)
PEAP-Microsoft Challenge Authentication Protocol
EAP-Transport Layer Security (EAP-TLS)
EAP-Tunneled TLS (EAP-TTLS)
EAP-Subscriber Identity Module (EAP-SIM)
Cisco LEAP

 

 

 

Encryption

::

::

::

::

AES-CCMP encryption (WPA2)
TKIP (WPA)
Cisco TKIP / WPA TKIP
IEEE 802.11 WEP keys of 40 bits and 128 bits

 

 

 

Safety

::

::

::

::

::

::

UL 60950-1
CAN/CSA-C22.2 No. 60950-1
UL 2043
IEC 60950-1 / EN 60950-1
FIPS 140-2 Pre-Validation List
Common Criteria

 

 

 

Radio approvals

::

::

::

::

::

::

::

::

::

::

::

::

FCC Part 15.247, 15.407
RSS-210 (Canada)
EN 300.328, EN 301.893 (Europe)
ARIB-STD 33 (Japan)
ARIB-STD 66 (Japan)
ARIB-STD T71 (Japan)
AS/NZS 4268.2003 (Australia )
EMI and susceptibility (Class B)
FCC Part 15.107 and 15.109
ICES-003 (Canada)
VCCI (Japan)
EN 301.489-1 and -17 (Europe)

 

 

 

Other certifications

::

::

::

IEEE 802.11g and IEEE 802.11a
FCC Bulletin OET-65C
RSS-102

 

 

 

Dimensions and weight

 :: 45 cm 25cm 16 cm Weight: 6 kg

 

 

 

Mounting kits

::

::

Standard wall mount kit is included
Mounting kits can be custom ordered

 

 

EX zone/division

::

ATEX zone 1 and Zone 2

Frequency

::

2.4 and 5 GHz

ATEX code

::

EX II 2G,Ex ib II T6

Max power

::

2 Watt