EX-AP-A : : Flame proof access point with ATEX certified antennas.

Intrinsically safe access point

Just Connect POE and the included EX antenna cable to install a fully featured wireless network in Hazardous area.

 

 

  • Introduction
  • Specifications
  • Certifications

The EX-AP-A is an EX certified (explosion proof ) access point, ATEX certified for hazardous area. The dual band 2.4 ghz and 5 ghzEx d /EEx de access point has been custom designed to accommodate a wide range of configurations and features like an EX-e junction box, 100-base-FX (fiber) connection, PoE/cat5, lightning protection, amplification and several antenna connections and configurations.

 

With the EX-AP-A you can create a state of the art wireless infrastructure directly in hazardous area with minimal efforts. The EX-AP-A has a dual radio design that enables coexistence of 802.11n, 802.11g and 802.11a networks. Wireless networks help organizations cut cabling cost and increase connectivity within their own facilities to start utilizing a wide range of wireless applications.

 

EX zone

 :: EX Zone 1

Wireless standards

 :: 802.11abgn

Enclosure

 :: EEx-d Explosion proof enclosure

Termination

 :: Ex-E junction box option

Security

 :: Advanced WPA2/802.11i security

Frequencies

 :: 2.4 ghz + 5ghz dual mode

Antenna output

 :: Intrinsically safe antenna output option

Quality of service

 :: 802.11e wireless multimedia

Mesh features

 :: Mesh network support

Protection

 :: Lightning/surge protection

Installation

 :: Easy to install (no fixed cables)

 

 

 

Antenna config

 

 

 

::

::

::

::

2W amplifier option for 2 km + range

Pixavi Xbeam A antennas included

Diversity or single antenna options

Aluminium and stainless steel versions

 

 

 

Connections

::

::

::

::

::

::

Fiber optic interface option (100base-fx)

POE (power over ethernet) support and

220 V version on available

EEX-d coax low loss connector option
For maintaining NORSOK requirements for the 220 volt version, aEx-e Junction box is included (specified in order code on page 4)

 

 

 

Radio data

::

::

::

::

802.11g output power: 100 mW
802.11a output power: 50 mW
Amplifier option available up to 2W
Maximum sensitivity: 96 dBm (1 mbps)

 

 

 

Security Standards

::

::

::

::

::

WPA
WPA2 (802.11i)
Cisco TKIP
Cisco message integrity check (MIC)
IEEE 802.11 WEP keys of 40 bits and 128 bits

 

 

 

802.1X EAP types

::

::

::

::

::

::

::

EAP-Flexible Authentication via Secure Tunneling
Protected EAP-Generic Token Card (PEAP-GTC)
PEAP-Microsoft Challenge Authentication Protocol
EAP-Transport Layer Security (EAP-TLS)
EAP-Tunneled TLS (EAP-TTLS)
EAP-Subscriber Identity Module (EAP-SIM)
Cisco LEAP

 

 

 

Encryption

::

::

::

::

AES-CCMP encryption (WPA2)
TKIP (WPA)
Cisco TKIP / WPA TKIP
IEEE 802.11 WEP keys of 40 bits and 128 bits

 

 

 

Safety

::

::

::

::

::

::

UL 60950-1
CAN/CSA-C22.2 No. 60950-1
UL 2043
IEC 60950-1 / EN 60950-1
FIPS 140-2 Pre-Validation List
Common Criteria

 

 

 

Radio approvals

::

::

::

::

::

::

::

::

::

::

::

::

FCC Part 15.247, 15.407
RSS-210 (Canada)
EN 300.328, EN 301.893 (Europe)
ARIB-STD 33 (Japan)
ARIB-STD 66 (Japan)
ARIB-STD T71 (Japan)
AS/NZS 4268.2003 (Australia )
EMI and susceptibility (Class B)
FCC Part 15.107 and 15.109
ICES-003 (Canada)
VCCI (Japan)
EN 301.489-1 and -17 (Europe)

 

 

 

Other certifications

::

::

::

IEEE 802.11g and IEEE 802.11a
FCC Bulletin OET-65C
RSS-102

 

 

 

Dimensions and weight

::

::

Aluminium enclosure version:Dimensions: 42cm 35cm 26cm Weight: 20 kg
Stainless steel enclosure version: Dimensions: 28cm 28cm 15 cm Weight: 23 kg

 

 

 

Mounting kits

::

::

Standard wall mount kit is included
Mounting kits can be custom ordered

 

EX zone/division

::

ATEX zone 1 and Zone 2

Frequency

::

2.4 and 5 GHz

ATEX code

::

EX II 2G,Ex de II T6

Certificate number

 :: DNV-2004-OSL-ATEX-0365X

Max power

::

2 Watt