Xpoint D : : Flame proof access point with intrinsically safe connections

Flame proof access point

 

 

 

 

  • Introduction
  • Specifications
  • Certifications

 

The best method to preserve signal strength and avoid reception loss is to place the access point as close as possible to the antenna. The Xpoint D offers the possibility to cut cable lengths and preserve signal as well as making of use the wide range of Xbeam series antennas to ensure optimal coverage and data rates.

 

The intrinsically safe N-type connections enables a simple mounting option with the possibility of mounting the APs

 

Just Connect POE and antenna cable to install a fully featured wireless network in hazardous area.

 

EX zone

 :: EX Zone 1

Wireless standards

 :: 802.11abgn

Enclosure

 :: EEx-d Explosion proof enclosure

Termination

 :: Ex-E junction box option

Security

 :: Advanced WPA2/802.11i security

Frequencies

 :: 2.4 ghz + 5ghz dual mode

Antenna output

 :: Intrinsically safe antenna output option

Quality of service

 :: 802.11e wireless multimedia

Mesh features

 :: Mesh network support

Protection

 :: Lightning/surge protection

Installation

 :: Easy to install (no fixed cables)

 

 

 

Antenna config

 

 

 

::

::

::

::

2W amplifier option for 2 km + range

VisiWear EX-ANT-B antennas included

Diversity or single antenna options

Aluminium and stainless steel versions

 

 

 

Connections

::

::

::

::

::

::

Fiber optic interface option (100base-fx)

POE (power over ethernet) support and

220 V version on available

EEX-d coax low loss connector option
For maintaining NORSOK requirements for the 220 volt version, aEx-e Junction box is included (specified in order code on page 4)

 

 

 

Radio data

::

::

::

::

802.11g output power: 100 mW
802.11a output power: 50 mW
Amplifier option available up to 2W
Maximum sensitivity: 96 dBm (1 mbps)

 

 

 

Security Standards

::

::

::

::

::

WPA
WPA2 (802.11i)
Cisco TKIP
Cisco message integrity check (MIC)
IEEE 802.11 WEP keys of 40 bits and 128 bits

 

 

 

802.1X EAP types

::

::

::

::

::

::

::

EAP-Flexible Authentication via Secure Tunneling
Protected EAP-Generic Token Card (PEAP-GTC)
PEAP-Microsoft Challenge Authentication Protocol
EAP-Transport Layer Security (EAP-TLS)
EAP-Tunneled TLS (EAP-TTLS)
EAP-Subscriber Identity Module (EAP-SIM)
Cisco LEAP

 

 

 

Encryption

::

::

::

::

AES-CCMP encryption (WPA2)
TKIP (WPA)
Cisco TKIP / WPA TKIP
IEEE 802.11 WEP keys of 40 bits and 128 bits

 

 

 

Safety

::

::

::

::

::

::

UL 60950-1
CAN/CSA-C22.2 No. 60950-1
UL 2043
IEC 60950-1 / EN 60950-1
FIPS 140-2 Pre-Validation List
Common Criteria

 

 

 

Radio approvals

::

::

::

::

::

::

::

::

::

::

::

::

FCC Part 15.247, 15.407
RSS-210 (Canada)
EN 300.328, EN 301.893 (Europe)
ARIB-STD 33 (Japan)
ARIB-STD 66 (Japan)
ARIB-STD T71 (Japan)
AS/NZS 4268.2003 (Australia )
EMI and susceptibility (Class B)
FCC Part 15.107 and 15.109
ICES-003 (Canada)
VCCI (Japan)
EN 301.489-1 and -17 (Europe)

 

 

 

Other certifications

::

::

::

IEEE 802.11g and IEEE 802.11a
FCC Bulletin OET-65C
RSS-102

 

 

 

Dimensions and weight

::

::

Aluminium enclosure version:Dimensions: 42cm 35cm 26cm Weight: 20 kg
Stainless steel enclosure version: Dimensions: 28cm 28cm 15 cm Weight: 23 kg

 

 

 

Mounting kits

::

::

Standard wall mount kit is included
Mounting kits can be custom ordered

 

EX zone/division

::

ATEX zone 1 and Zone 2

Frequency

::

2.4 and 5 GHz

ATEX code

::

EX II 2G,Ex d[ib] II T6

Certificate number

 :: DNV-2004-OSL-ATEX-0365X

Max power

::

2 Watt