:: Atex approved RF antenna ::

 

The Xbeam A is an ATEX approved rf antenna, certified for creating wireless networks and wireless telemetry systems in hazardous area. The antenna is optimized for use in steel and concreet structure environments where multipath effects and reflections are present. The antenna can be utilized in wlan, wifi, bluetooth, zigbee and other 2.4ghz and 5 ghz applications.

 

The antenna features increased safety (EX-e) protection technology, which means that it does not put specific requirements on protection circuitry on the radio side. In other words, any wlan accesspoint can be used.

 

The Xbeam EX is a prefered solution where the access point can be placed in safe zone or safe area and where coax cable lengths does not exceed 30 meters. For cable streches above 30 meters or for lossless coverage, we recommend utilizing our EX-AP-A or Xpoint series of access points which can be placed in the EX zone (IECex and ATEX zone 1 and zone 2)

 

Compatibility	::	Wireless lan (802.11b , 802.11g, 802.11a, 802.11n), Bluetooth, Zigbee (802.15.4)
Frequency	::	2.4 and 5 GHz
Gain	::	2 dBi
Polarization	::	Vertical
Vertical beam width	::	80°
Horizontal beam width	::	360° (omni directional)
Impedance.	::	50 Ohm
Max input voltage (amplitude)	::	15v (EX limitation)
Max input power	::	2 Watts (EX limitation)
VSWR	::	< 1.5:1 avg.
Weight	::	0.21 lbs. (100g )
Length	::	5 in. (125 mm)
Radome material	::	EX certified plastic material
Wind survival	::	>150 MPH
Operating temperature	::	-40° C to to 60° C (-40° F to 185° F)
Mounting method	::	Wall/mast adapter
Cable	::	Check out out cable selections
Product order code	::	2.4 ghz: XBEAM-A-EX

 

 

EX zone/division	::	ATEX zone 1 and Zone 2
Frequency	::	2.4 and 5 GHz
ATEX code	::	EX II 2G,Ex e II T6
Certificate number	::	DNV-2004-OSL-ATEX-0365X
Max power	::	2 Watt